Frequently Asked QuestionsRequest a Print CatalogContact UsSearch for Trimmer Parts & Accessories by CaliberWeb Links for the Gun EnthusiastNews ReleasesGunsmith and Reloading ToolsOur Retail DistributorsReturn to the Home Page



Ordering Chart for "Original" Case Trimmer

CARTRIDGES
Bullet
Diameter
Trim
Pilot
Order#
Collet
Order#
Neck
Reamer
Order#
Neck
Reamer
Diameter
17 Rem. (requires 17 cal. cutter shaft) .171” CT1017 CT2001 NR1017 .1730”
22 Hornet, 22 K Hornet-if .224” bullet is reloaded see next line .223” CT102- 2 or 3 NR1223 .2255”
222 Rem., 222 Rem. Mag., 22 Varm., 223 Rem., 225 Win., 5.6x50R .224” CT1022 CT2001 NR1224 .2265”
22 250, 220 Swift, 221 Fireball, 22 PPC, 22 B.R. Rem. .224” CT1022 CT2001 NR1224 .2265”
218 Bee & Mashburn, 219 Zipper and Wasp, 22 Sav., 22-30-30 .224” CT1022 CT2002 NR1224 .2265”
228 Krag, 22 Jet C.F. Magnum, 224 Varm. Weatherby, 22 PPC .224” CT1022 CT2003 NR1224 .2265”
243 Win., 6mm, 6mm mag & Belted Exp., 244 Rem., 6mm B.R. Rem. .243” CT1024 CT2001 NR1243 .2455”
6mm PPC .243” CT1024 CT2003 NR1243 .2455”
6mm Krag and 6mm Krag Long .243” CT1024 CT2003 NR1243 .2455”
257, 250 Sav. & Ackley, 250-3000, 25 Souper, 25-06 .257” CT1025 CT2001 NR1257 .2595”
25-20 Repeater, 25-35, 25 Rem. .257” CT1025 CT2002 NR1257 .2595”
25 Krag Imp., 256 Win. .257” CT1025 CT2003 NR1257 .2595”
6.5x57 Mau., 6.5mm Win., 6.5 Jap Mau., 6.5x55 Swede & SKAN .264” CT1026 CT2001 NR1263 .2665”
6.5x257 Jap, 256 Newton, 260 A.A.R., 264 Win. Mag. .264” CT1026 CT2001 NR1263 .2665”
270 Win., Sav., Gibbs, Weatherby & Ackley, 257 H & H .277” CT1027 CT2001 NR1277 .2795”
7mm, 7x57 Mau., 7mm Weatherby, 7x64, 276, 7mm-08, 7mm TCU .284” CT1028 CT2001 NR1284 .2865”
280 Rem., 284 Win., 7mm Rem. Mag., 7mm B.R. Rem. .284” CT1028 CT2001 NR1284 .2865”
30-06, 308 Win., 300 Mag., 7.62 NATO, 300 Savage .308” CT1030 CT2001 NR1308 .3110”
30-30, 30 Rem., 30 WCF, 303 Savage, 7.5x55 Swiss .308” CT1030 CT2002 NR1308 .3110”
30-40 Krag, 30 Carbine, 30-40 Imp., 7.62x39 .308” CT1030 CT2003 NR1308 .3110”
303 British, 32 S&W Long, 7.65 Mau., 7.7mm Jap .311” CT1031 CT2001 NR1311 .3135”
32-20 .311” CT1031 CT2002 NR1311 .3135”
8x57, JS & RS, 8x60, 7.92x57, 8mm-06, 8mm Mauser .323” CT1032 CT2001 NR1323 .3255”
32 Win. Spec., 32 Rem., 32-40 .323” CT1032 CT2002 NR1323 .3255”
333 Win., 333 OKH, 33 Ackley .333” CT1033 CT2001
33 Win. .338” CT103- *CT2004
338 Win., 338 Win. Mag., 338 Gibbs, 340 Weatherby Mag. .338” CT103- CT2001 NR1338 .3405”
348 Win. .348” CT1034 *CT2004
35 Rem., 358 Win., 358 Norma Mag. .357”,.358” CT1035 CT2001 NR1358 .3605”
38 Colt Super .357”,.358” CT1035 CT2002 NR1358 .3605”
38 Spec., 357 Magnum, 35 Win. .357”,.358” CT1035 CT2003 NR1358 .3605”
9mm Luger (needs extra short base) .355”,.356” CT1351 CT2002 NR1355 .3575”
380 Auto (needs extra short base) .356” CT1351 CT2001
9.3mmx74R, 9.3mmx62 .365” CT1368 CT2001
375 Mag., 375-06, 375 Barnes, Weatherby & Ackley, 375 H&H .375” CT1375 CT2001 NR1375 .3780”
38-50, 378 Weatherby .375” CT1375 *CT2004 NR1375 .3780”
375 Winchester .376” CT1375 CT2002 NR1375 .3780”
41 Colt, 401 Win., 38-40, 395-400, 41 S&W .400” CT1400 CT2001 NR1400 .4025”
10mm Auto Pistol, 40 S&W .400” CT1400 CT2003 NR1400 .4025”
41 Rem., Mag. .410” CT1410 CT2002 NR1410 .4125”
416 Weatherby, 416 Rigby .416” CT1416 *CT2004
44 S&W Spec., 44 Rem. Mag., 44-40, 444 Marlin Mag. .429” CT1432 CT2001 NR1432 .4340
45 ACP, 45 Auto Rim., 45 Win. Magnum .452” CT1452 CT2001 NR1452 .4545
45-90 .454” CT1452 *CT2004
45 Long Colt .452”(Pre-WWII).454” CT1455 1 or 2
45-70 .457” CT1458 *CT2004
450 Watts, 458 Win., 450 Ackley Mag. .459” CT1458 CT2001 NR1458 .4605”

* #4 COLLET USAGE: Use of the #4 Collet requires that the “Original” Case Trimmer Collet housing opening be enlarged to .610”. This will not affect the use of the 1, 2 or 3 collet. This can be opened at the factory upon request at no charge. Note: RETURN HOUSING ONLY—do not send entire Case Trimmer.

"Original" Case Trimmer Collet Step Dimensions
Collet #1 (CT2001) Collet #2 (CT2002) Collet #3 (CT2003) Collet #4 (CT2004)
.370 .473 .532 .350 .418 .506 .356 .440 .545 one step .605

Special case trimmer pilots can be ordered through dealers or direct through Forster Products. Allow three (3) days for special pilot. Any special size can be ordered. Special rim holding collets can also be special ordered. An additional machining fee will be charged.