Ordering Chart for "Power" Case Trimmer

CARTRIDGES	Bullet Diameter	Trim Pilot Order#	Collet Order#	Neck Reamer Order#	Neck Reamer Diameter
17 Rem. (requires 17 cal. cutter shaft)	.171”	CT1017	CT2001	NR1017	.1730”
22 Hornet, 22 K Hornet-if .224” bullet is reloaded see next line	.223”	CT102-	2 or 3	NR1223	.2255”
222 Rem., 222 Rem. Mag., 22 Varm., 223 Rem., 225 Win., 5.6x50R	.224”	CT1022	CT2001	NR1224	.2265”
22 250, 220 Swift, 221 Fireball, 22 PPC, 22 B.R. Rem.	.224”	CT1022	CT2001	NR1224	.2265”
218 Bee & Mashburn, 219 Zipper and Wasp, 22 Sav., 22-30-30	.224”	CT1022	CT2002	NR1224	.2265”
228 Krag, 22 Jet C.F. Magnum, 224 Varm. Weatherby, 22 PPC	.224”	CT1022	CT2003	NR1224	.2265”
243 Win., 6mm, 6mm mag & Belted Exp., 244 Rem., 6mm B.R. Rem.	.243”	CT1024	CT2001	NR1243	.2455”
6mm PPC	.243”	CT1024	CT2003	NR1243	.2455”
6mm Krag and 6mm Krag Long	.243”	CT1024	CT2003	NR1243	.2455”
257, 250 Sav. & Ackley, 250-3000, 25 Souper, 25-06	.257”	CT1025	CT2001	NR1257	.2595”
25-20 Repeater, 25-35, 25 Rem.	.257”	CT1025	CT2002	NR1257	.2595”
25 Krag Imp., 256 Win.	.257”	CT1025	CT2003	NR1257	.2595”
6.5x57 Mau., 6.5mm Win., 6.5 Jap Mau., 6.5x55 Swede & SKAN	.264”	CT1026	CT2001	NR1263	.2665”
6.5x257 Jap, 256 Newton, 260 A.A.R., 264 Win. Mag.	.264”	CT1026	CT2001	NR1263	.2665”
270 Win., Sav., Gibbs, Weatherby & Ackley, 257 H & H	.277”	CT1027	CT2001	NR1277	.2795”
7mm, 7x57 Mau., 7mm Weatherby, 7x64, 276, 7mm-08, 7mm TCU	.284”	CT1028	CT2001	NR1284	.2865”
280 Rem., 284 Win., 7mm Rem. Mag., 7mm B.R. Rem.	.284”	CT1028	CT2001	NR1284	.2865”
30-06, 308 Win., 300 Mag., 7.62 NATO, 300 Savage	.308”	CT1030	CT2001	NR1308	.3110”
30-30, 30 Rem., 30 WCF, 303 Savage, 7.5x55 Swiss	.308”	CT1030	CT2002	NR1308	.3110”
30-40 Krag, 30 Carbine, 30-40 Imp., 7.62x39	.308”	CT1030	CT2003	NR1308	.3110”
303 British, 32 S&W Long, 7.65 Mau., 7.7mm Jap	.311”	CT1031	CT2001	NR1311	.3135”
32-20	.311”	CT1031	CT2002	NR1311	.3135”
8x57, JS & RS, 8x60, 7.92x57, 8mm-06, 8mm Mauser	.323”	CT1032	CT2001	NR1323	.3255”
32 Win. Spec., 32 Rem., 32-40	.323”	CT1032	CT2002	NR1323	.3255”
333 Win., 333 OKH, 33 Ackley	.333”	CT1033	CT2001
33 Win.	.338”	CT103-	*CT2004
338 Win., 338 Win. Mag., 338 Gibbs, 340 Weatherby Mag.	.338”	CT103-	CT2001	NR1338	.3405”
348 Win.	.348”	CT1034	*CT2004
35 Rem., 358 Win., 358 Norma Mag.	.357”,.358”	CT1035	CT2001	NR1358	.3605”
38 Colt Super	.357”,.358”	CT1035	CT2002	NR1358	.3605”
38 Spec., 357 Magnum, 35 Win.	.357”,.358”	CT1035	CT2003	NR1358	.3605”
9mm Luger (needs extra short base)	.355”,.356”	CT1351	CT2002	NR1355	.3575”
380 Auto (needs extra short base)	.356”	CT1351	CT2001
9.3mmx74R, 9.3mmx62	.365”	CT1368	CT2001
375 Mag., 375-06, 375 Barnes, Weatherby & Ackley, 375 H&H	.375”	CT1375	CT2001	NR1375	.3780”
38-50, 378 Weatherby	.375”	CT1375	*CT2004	NR1375	.3780”
375 Winchester	.376”	CT1375	CT2002	NR1375	.3780”
41 Colt, 401 Win., 38-40, 395-400, 41 S&W	.400”	CT1400	CT2001	NR1400	.4025”
10mm Auto Pistol, 40 S&W	.400”	CT1400	CT2003	NR1400	.4025”
41 Rem., Mag.	.410”	CT1410	CT2002	NR1410	.4125”
416 Weatherby, 416 Rigby	.416”	CT1416	*CT2004
44 S&W Spec., 44 Rem. Mag., 44-40, 444 Marlin Mag.	.429”	CT1432	CT2001	NR1432	.4340
45 ACP, 45 Auto Rim., 45 Win. Magnum	.452”	CT1452	CT2001	NR1452	.4545
45-90	.454”	CT1452	*CT2004
45 Long Colt	.452”(Pre-WWII).454”	CT1455	1 or 2
45-70	.457”	CT1458	*CT2004
450 Watts, 458 Win., 450 Ackley Mag.	.459”	CT1458	CT2001	NR1458	.4605”

* #4 COLLET USAGE: Use of the #4 Collet requires that the “Original” Case Trimmer Collet housing opening be enlarged to .610”. This will not affect the use of the 1, 2 or 3 collet. This can be opened at the factory upon request at no charge. Note: RETURN HOUSING ONLY—do not send entire Case Trimmer.

Special case trimmer pilots can be ordered through dealers or direct through Forster Products. Allow three (3) days for special pilot. Any special size can be ordered. Special rim holding collets can also be special ordered. An additional machining fee will be charged.

Ordering Chart for "Power" Case Trimmer

"Original" Case Trimmer Collet Step Dimensions