It keeps your powder flowing evenly with minimal shearing.

Powder Measure Instructions

The superior design of our Bench Rest® Powder Measure throws uniform charges. The charge arm/operating handle meters the powder and dispenses a flow of powder that is free from extremes in variation while minimizing powder shearing. The powder hopper's built-in baffle feeds powder into the charge arm very uniformly. Our Bench Rest® measure can throw consistent charges from 2 1/2 grains of Bulls-Eye to 95 grains of 4320.

Convenient To Use

To set a charge, dump a pre-determined weight charge through the powder hopper into the charge arm. Then, rotate the charge arm. This action cuts off the powder supply from the hopper. Next, slide the charge adjustment bar until it contacts the powder before you lock it in place.

Specifications:

• Small outlet serves as a built-in baffle.
• Two drop tubes for large and small capacity cases.
• The unit fastens securely to a bench or shelf.
• A large lock nut holds the powder adjustment charge rod firmly, permitting convenient charging loads.
• The Vernier scale located on the charge arm allows minute changes in capacity.
• The body and charge arm are manufactured from precisely machined, high quality carbon steel castings.
• The flexible design automatically compensates for changes in dimension of the working surfaces that result from wear.

Order No.	Description
010631	Bench Rest® Powder Measure
017941	Powder Measure Stand (sold separately)
011051	Long Drop Tube
011021	Powder Funnel with Long Drop Tube