Forster Products
Home Page
View Cart
Reloading Tools
Ammunition Measurement System
Co-Ax® Reloading Press
Reloading Dies
Reloading Die Sets
Power Adapter for Case Trimmers
Hollow Pointer
3 in 1 Cutter
Outside Neck Turners
Primer Pocket Chamfering Tool
Neck Reamer
Hot 100
Case & Cartridge Inspector
Primer Seater
Deburring Tools
Bullet Pullers and Collets
Sizing Lubricants
Gunsmithing Tools
Universal Sight Mounting Fixture
Headspace Gages (Gauges)
Gunsmithing Screws
Gunsmithing Screwdrivers
Gold Inlay Filling Kit
Gunsmithing Accessories
Locate a Distributor
PDF Library / User Instructions
Forster Focus
Video Library
Forster ProStaff
Terms and Conditions
Contact Us
About Us
Newsletter Sign Up
Catalog Request
Become a Fan on Facebook
Subscribe to Forster on YouTube
Follow Us on Twitter
Follow Us on LinkedIn

Headspace Gage Ordering Chart

Headspace Gage Instructions

Headspace Gage 11 pc Sets, as well
as custom-length headspace gages, are available. A special grinding fee will apply.
Contact us with inquiries for special gages.
Shop quickly with express shopping:

Headspace Gage

Why Choose Forster Headspace Gages?
Exclusive Forster quality offers the best way to check your rifle chamber for safety.

Your safety and performance are on the line.

Improper Headspace may be dangerous to the shooter as well as an impairment to accuracy. The proper use of a Headspace Gage is the most reliable way to test the length of a rifle chamber. Forster Headspace Gages are made to exacting manufacturing standards to ensure accurate testing of your rifle's chamber. Smart gunsmiths, shooters and reloaders select Forster’s Headspace Gages because:

Choosing the Correct Gage
According to SAAMI (Sporting Arms and Ammunition ManufacturersEInstitute), who set product standards for firearms and ammunition, headspace is “The distance from the face of the closed breech of a firearm to the surface in the chamber on which the cartridge case seats.ESome shooters are under the misconception that headspace is fixed over the life of the firearm. Headspace can increase after repeated use of ammunition that causes too much pressure. Handloaders should routinely check rifle chamber headspace every thousand rounds.

Headspace is measured differently depending on whether the firearm’s caliber uses rimmed, belted or rimless cartridges.

Rimmed and Belted Cartridges

Rimless Cartridge

Headspace = distance between the bolt face and the top of the rim (chamber face) when the bolt is closed.

Headspace = distance between the bolt face and a datum line (determined by SAAMI) where the front of the cartridge rests on its shoulder when the bolt is closed.

Rimmed and Belted Cartridges

Rimless Cartridges

Forster offers three lengths of headspace gages per rifle caliber. In order from the shortest to longest, they are: GO, NO-GO and FIELD:

  1. GO: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI’s maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate and safe chamber that will accept SAAMI maximum ammo. Although the GO gage is necessary for a gunsmith or armorer, it usually has fewer applications for the collector or surplus firearms purchaser.
  2. NO-GO: Corresponds to the maximum headspace Forster recommends for gunsmiths chambering new, bolt action rifles. This is NOT a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for checking a newly-reamed chamber in order to ensure a tight and accurate chamber.
  3. FIELD: Corresponds to the longest safe headspace. If a rifle closes on a FIELD gage, its chamber is dangerously close to, or longer than, SAAMI’s specified maximum chamber size. If chamber headspace is excessive, the gun should be taken out of service until it has been inspected and repaired by a competent gunsmith. FIELD gages are slightly shorter than the SAAMI maximum in order to give a small safety margin.



DNV Forster adheres to ISO 9001:2008
Quality Management System Standards.
Forster Products' certificate
CERT-05739-2006-AQ-HOU-RvA is
accredited by independent auditor DNV.
310 East Lanark Avenue
Lanark, IL 61046
PHONE: (815) 493-6360
FAX: (815) 493-2371
Internet Payment Gateway
©2015 All Rights Reserved