Forster Products
Home Page
Search
View Cart
Sale
Reloading Tools
Ammunition Measurement System
Co-Ax® Reloading Press
Reloading Dies
Reloading Die Sets
Power Adapter for Case Trimmers
Hollow Pointer
3 in 1 Cutter
Outside Neck Turners
Primer Pocket Chamfering Tool
Neck Reamer
Hot 100
Case & Cartridge Inspector
Primer Seater
Powder Measuring Tools
Deburring Tools
Bullet Pullers and Collets
Sizing Lubricants
Gunsmithing Tools
Universal Sight Mounting Fixture
Headspace Gages (Gauges)
Gunsmithing Screws
Gunsmithing Screwdrivers
Gold Inlay Filling Kit
Gunsmithing Accessories
Apparel
Resources
Resources - Industry Links
Locate a Dealer/Reseller
PDF Library / User Instructions
Forster Focus
Video Library
Forster ProStaff
Customer Service
FAQ
Contact Us
About Us
Newsletter Sign Up
Catalog Request
Become a Fan on Facebook
Subscribe to Forster on YouTube
Follow Us on Twitter
Follow Us on LinkedIn
pinterest

 
CUSTOM MACHINING SERVICES 

Custom Machining to customer's specifications
(Allow 3-4 week delivery for collets, neck reamers, ont pilots.  2 weeks for ct pilots)

Case Trimmer Pilot Retail price + $7.00 Machining Fee 
Specify outside diameter desired.
   
Case Trimmer Collet Retail price + $30.00 Machining Fee
Specify cartridge case's rim diameter.
   
Neck Reamer Retail price + $12.00  Machining Fee
Specify outside diameter desired.
   

Neck Turner Pilot
for the OT1010

Retail price + $10.00 Machining Fee
Specify pilot diameter desired. (for use on the Case Trimmer mounted Outside Neck Turner - OT1010)
 
Neck Turner Pilot
(with shoulder)
for the
HOT100
Retail price + $10.00 Machining Fee
Specify pilot diameter desired. (for use on the Hand Held Outside Neck Turner - HOT100)

Custom Machining FAQsCustom Machining - Reloading Dies:

CUSTOM BENCH REST SEATER DIE or CUSTOM ULTRA MICROMETER SEATER DIE:  (at this time we are not making custom dies)
     If you have the chambering reamer with which your rifle was cut, we can use it to make an excellent Custom Seater die.  Even if you do not have your rifle chambering reamer, you may still contact us because we may have a reamer in our tool bin for your cartridge.  (If possible send a sample cartridge case that has been fireformed in your rifle)
Retail price of Seater die + $25 Machining Fee + shipping.  Please allow 2-6 weeks.

CUSTOM "P-30" SEATING DIE CHAMBER ONLY: 
     If you have the chambering reamer with which your rifle was cut, we can use it to make an excellent Custom Seater die chamber "P-30".  Even if you do not have your rifle chambering reamer, you may still contact us because we may have a reamer in our tool bin for your cartridge.  (If possible send a sample cartridge case that has been fireformed in your rifle)
Retail price of the P-30 Blank + $25 machining Fee + shipping.  Please allow 2-6 weeks.

CUSTOM P-30 DIE CHAMBER BLANK includes specially machined bullet channel to customer specification. Usually needed for use with your larger diameter, cast bullets.  Specify exact diameter of internal bullet channel desired. 
Retail price of P-30 + $10 machining Fee + shipping.  Please allow 2-6 weeks.

CUSTOM J-30 SEATING STEM to fit specific bullet ogive's shape
You should supply 2-3 sample bullets. (all customer property will be returned) 
Specify for use with the Ultra Micrometer Seating Die or the Bench Rest Seating Die.
Retail price of J-30 Stem + $7 machining Fee + shipping.  (Or, you may send in your existing stem & just pay the machining fee)

CUSTOM FULL LENGTH SIZER DIE.  We will need to determine whether we have a sizing die reamer in our tool bin that will work, or whether you will need to purchase a custom sizing die reamer from a third party reamer manufacturer. 
Two times Retail price of Sizer Die + shipping. Please allow 14-16 weeks.

(Sorry, at this time we are not making custom dies)

CUSTOM BUSHING BUMP SIZER DIE  We will need to determine whether we have a reamer in our tool bin to fill your need (please note that due to bushing size availability, only 308 or smaller cartridges should be ordered) . If you have the chambering reamer with which your rifle was cut (308 or smaller), we can use it to make an excellent Bushing Bump die.  If possible, send a sample cartridge case that has been fireformed in your rifle. Be sure that we stock the size bushing you require before you place your custom order. Bushings sold separately.
Two times Retail price of Bushing Bump Sizer Die + shipping.  Please allow 14-16 weeks.

CUSTOM neck honing of Forster FULL LENGTH SIZING or NECK SIZING DIE to your specification.  We custom hone the inside neck diameter by using a diamond stoning process. We enlarge the inside diameter to prevent over-sizing of the case neck due to thick neck walls. You may require this service for two reasons: 1) If you use some brands of brass cases, such as Norma or Lapua, which have thicker neck walls. 2) If you do not intend to outside neck turn case necks that have thickened after repeated firings. Please specify desired inside neck diameter. Note: 1) No more than .008" stock removal from your existing die neck diameter is possible. 2) Honing is done in increments of one half thousandth of an inch (.0005"), meaning that your specified inside diameter must be either.XXX0" or .XXX5".
$12.00 plus actual return shipping cost & insurance Please allow 1-3 weeks.

CUSTOM under-size EXPANDER BALL "E-10"   Specify exact outside diameter desired.  We can make special expander balls,"E-10's", up to three thousandths smaller than bullet diameter. 
Retail price + $7 Special Machining Fee + shipping.  Please allow 1-2 weeks.

SERVICES:

REPOLISH SIZING DIE: To keep the inside of your dies scratch-free, ensure the outside and inside of your cases are free of powder residue and other debris, case necks are deburred and the die itself is kept clean. This precaution also applies to the "E-Z" Out Expander Ball on the Decapping/Expander Assembly, where brass chips and other debris may inadvertently be transferred to the case and die neck. Chips that result from trimming and deburring, or a case that has not been deburred, are especially damaging to die interiors. These chips can become embedded in the die interior. The resulting brass against brass effect "galls" or wears away minute pieces of brass on the case, and gets worse with each use of the die. Repolishing $7 + actual shipping

STUCK CASE REMOVAL (includes repolishing of die):  $9 + shipping  We will notify you if you will need additional replacement parts.

RESET CARBIDE BLADES in 3-in-1 Case Mouth Cutter (any caliber) $15.00 Postage paid

RESHARPEN ORIGINAL CASE TRIMMER CUTTER SHAFT or POWER CASE TRIMMER CUTTER SHAFT:  $9 Postage paid within continental US (lower 48 states)

RECONDITION & CLEAN T-SLOTS ON UNIVERSAL SIGHT MOUNTING FIXTURE BASE:    $26.00 + shipping

CUSTOM MACHINED UNIVERSAL SIGHT MOUNTING FIXTURE OVERARM:
Spacing Customized up to 3 liners (Must specify hole spacing desired).  Your Universal Sight Mounting Fixture Base (p/n UF1000-011) must be sent to Forster Products so Overarm can be precisely fitted to it. $95 + shipping

OPEN TRIMMER ORIGINAL COLLET HOUSING (pre 2010) TO .610" to accommodate the #4 Collet (p/n CT2004):  No Charge
(Please note that Original Trimmers (p/n CT1010) manufactured after June 2010 will accommodate the #4 housing without modification)

UPGRADE YOUR Model B-2 TO a B-3 CO-AX PRESS (new taller Handle casting):

$79 price - plus actual shipping cost to return press to you.  Includes labor, new fork handle casting and all related parts needed to changeover (handle tube, handle grip, set screws, roll pins, new packaging and inserts included).

 

 
 


 
 
 
DNV Forster adheres to ISO 9001:2008
Quality Management System Standards.
Forster Products' certificate
CERT-05739-2006-AQ-HOU-RvA is
accredited by independent auditor DNV.
FORSTER PRODUCTS, INC.
310 East Lanark Avenue
Lanark, IL 61046
PHONE: (815) 493-6360
FAX: (815) 493-2371
Internet Payment Gateway
Copyright © 2013 All Rights Reserved