The Forster Primer Pocket Swaging tool is made to use in the Forster Co-Ax Press to swage your military crimped primer pockets.  Both the large and small pocket swaging tools are intended to be used in place of the Primer Seating assembly at the top of the press. (Both large and small swagging tools included)

Disclaimer : THIS IS A PROTOTYPE

 Directions

• Simply unscrew your primer seater assembly on the top of the press and screw in your swaging tool
• Align your case like you would if you were priming a case on the press by using the locator tool on a case with no crimp
• Set the jaws to hold your case in place
• Insert case and push back on press handle to swage your cases primer pocket
• There is no controlled stop and is done by feel so there is risk of bending rims. Pockets should be checked for size after.

NOTE : We have done limited testing on this product with good success but we still would like your input. Please email us at info@forsterproducts.com with any comments or suggestions on this tool.