- Case Trimmers
- Case Trimmer Tools
- Power Adapter for Original, Classic, and 50 BMG Case Trimmers
- Hand Held Outside Neck Turner
- Co-Ax® Reloading Press
- Bullet Pullers
- Co-Ax Primer Seater
- Bench Rest Powder Measure
- Co-Ax Case & Cartridge Inspector
- Case Sizing Lubricants: Case Neck Graphiter
- Sizing Dies
- Seater Dies
- Stuck Case Remover
- Gunsmithing Tools
Case Trimmers
Parts For Original Case Trimmers
| Part Number (SKU) | Name |
|---|---|
| CT1010 | Original Case Trimmer (no collet or pilot) |
| CT1010-011 and CT1010-012 | Case Trimmer Collet Screw Handle assembled to Case Trimmer Collet Screw (parts #011 and #012 must be purchased together) |
| CT1010-013 | Case Trimmer Collet Housing |
| CT1010-014 | Case Trimmer O-ring for Cutter Shaft |
| CT1010-019 | Case Trimmer Bearing |
| CT1010-020 | Case Trimmer Stop Collar, with Screws |
| CT1010-015 | Case Trimmer Stop Collar Screw (8-32×1/8″ stop collar fine adjustment set screw) |
| CT1010-016 | Case Trimmer Stop Collar Screw (8-32x 3/8″ stop collar coarse adjustment set screw) |
| CT1010-017 | Case Trimmer Stop Collar Screw (8-32x 5/16″ stop collar fine adjustment) |
| CT1010-021 | Case Trimmer Knob |
| CT1010-003 | Case Trimmer Plastic Cap for Knob |
| CT1010-022 | Case Trimmer Knob Screw |
| CT1010-023 | Case Trimmer Crank Handle |
| CT1010-024 | Case Trimmer Base Screw-Long for bearing side |
| CT1010-025 | Case Trimmer Base Screw-Short for housing side |
| CT1010-026 | Case Trimmer Nylon Washer |
| CT1010-027 | Case Trimmer Wood Screws for base. (4 required) |
| CT1010-101 | Case Trimmer Crank Handle Assembly with Knob & Screw (parts # 021, 003, 022, & 023) |
| CT1010-CTB101 | Standard Base for Case Trimmer |
| CT1010-CTB103 | Long Base (6-1/2″) for Case Trimmer (optional) |
| CT1010-CTC400 | Cutter Shaft for Original Case Trimmer |
| CT1010-CTC417 | 17 Caliber Cutter Shaft for Original Case Trimmer |
| HEXWRENCH5/64 | 5/64″ Hex Wrench |
Parts For Classic Case Trimmers
| Part Number (SKU) | Name |
|---|---|
| CLCT00 | Classic Case Trimmer (no collet or pilot) |
| CLCT00-012 | Classic Case Trimmer Collet Screw |
CLCT00-013 | Classic Case Trimmer Housing |
| CLCT00-019 | Classic Case Trimmer Bearing |
| CLCT00-020 | Classic Case Trimmer Stop Collar assembled with 3 screws |
| CLCT00-CTC400 | Classic Case Trimmer Cutter Shaft |
| CT1010-101 | Case Trimmer Crank Handle Assembly |
| CT1010-CTB103 | Case Trimmer Base-Long (6.5″ long. Included with Classic Case Trimmer) |
| CT1010-CTB101 | Case Trimmer Base-Regular Length (5-3/8″ long. Required for some shorter calibers) |
| CT1010-025 | Case Trimmer Housing Base Screw Short |
| 50BMGCT-024 | Case Trimmer Bearing Base Screw Long |
| 50BMGCT-024A | #10 HI Collar Lock Washer |
| HEXWRENCH5/64 | 5/64″ Hex Key Wrench |
| HEXWRENCH5/32 | 5/32″ Hex Key Wrench |
Parts For 50 BMG Case Trimmers
| Part Number (SKU) | Name |
|---|---|
| 50BMGCT-013 | 50 BMG Case Trimmer Housing |
| 50BMGCT-014 | 50 BMG Case Trimmer O-ring for shaft |
| 50BMGCT-019 | 50 BMG Case Trimmer Bearing |
| 50BMGCT-020 | 50 BMG Case Trimmer Stop Collar (with 2 screws) |
| 50BMGCT-024 | 50 BMG Case Trimmer Base Screw (long) |
| 50BMGCT-024A | #10 HI-Collar Lock Washer |
| CT1010-025 | Case Trimmer Base Screw (short) |
| 50BMGCT-CTC400 | 50 BMG Case Trimmer Cutter Shaft |
50BMGCT-XXLBASE | 50 BMG Case Trimmer Base (7″ special length) |
HEXWRENCH5/64 | 5/64″ Hex Key Wrench |
HEXWRENCH5/32 | 5/32″ Hex Key Wrench |
CT1010-101 | Case Trimmer Crank Handle Assembly |
Parts For Power Case Trimmers
| Part Number (SKU) | Name |
|---|---|
| PT1010 | Power Case Trimmer (for use with a drill press) |
PT1010-011 | Power Case Trimmer Base |
PT1010-012 | Power Case Trimmer Collet Locking Handle |
PT1010-013 | Power Case Trimmer Knob |
PT1010-014 | Power Case Trimmer Lineup Bar |
PT1010-015 | Power Case Trimmer Collet Screw |
| CT1010-013 | Power Case Trimmer Collet Housing |
| PT1010-PCT400 | Regular Cutter Shaft for Power Case Trimmer |
| PT1010-PCT417 | 17 Caliber Cutter Shaft for Power Case Trimmer |
Case Trimmer Tools
Parts For 3-in-1 Case Mouth Cutter
| Part Number (SKU) | Name |
|---|---|
| CT1010-015 | Case Trimmer Stop Collar Screw (8-32 x 1/8″ stop collar fine adjustment set screw) |
| CT1010-017 | Case Trimmer Stop Collar Screw (8-32 x 5/16″ stop collar fine adjustment set screw) |
3CUT-011 | Carbide Blade Holder |
| 3CUT-012 | Carbide Blade (ID chamfer & trim to length) |
| 3CUT-013 | Carbide Blade (OD chamfer) |
| 3CUT-014 | 8-32 X 3/16″ Socket Set Screw |
| HEXWRENCH5/64 | 5/64″ Hex Key Wrench |
Parts For Outside Neck Turner
| Part Number (SKU) | Name |
|---|---|
| OT1010 | Outside Neck Turner |
| OT1010-100 | Outside Neck Turner Body (with screws and carbide cutter) |
OT1010-011 | Outside Neck Turner Body Only (without screws or carbide cutter) |
| OT1010-012 Reg | Carbide Cutter for Outside Neck Turner |
| OT1010-012 .17 | 17 Caliber Carbide Cutter for Outside Neck Turner |
OT1010-013 | Outside Neck Turner Cam |
| OT1010-014 | Outside Neck Turner Cam Follower |
Parts For Hollow Pointer
| Part Number (SKU) | Name |
|---|---|
| HP1008 | Hollow Pointer 1/8″ Tool (commonly for handgun ammo) |
| HP1016 | Hollow Pointer 1/16″ Tool (commonly for rifle ammo) |
HP1008-011 | Hollow Pointer Guide Bushing 1/8″ |
HP1016-011 | Hollow Pointer Guide Bushing 1/16″ |
| HP1008-100 | Hollow Pointer , 1/8″ Drill |
| HP1016-100 | Hollow Pointer , 1/16″ Drill |
Parts For Deburring Tool
| Part Number (SKU) | Name |
|---|---|
| DB1000 | Deburring Tool, Inside-Outside (without base) |
| DB2000 | Deburring Tool Base (without deburring tool) |
DB2000-011 | Deburring Tool Base Bearing |
DB2000-012 | Deburring Tool Base Shaft |
DB2000-013 | Deburring Tool Base (Aluminum Base only) |
Power Adapter for Original, Classic, and 50 BMG Case Trimmers
| Part Number (SKU) | Name |
|---|---|
| PA1000 | Power Adapter for Case Trimmers (Original, Classic or BMG) |
PA1000-011 | Power Adapter – Threaded Bushing |
PA1000-012 | Power Adapter – Hex Screw |
Hand Held Outside Neck Turner
| Part Number (SKU) | Name |
|---|---|
| HOT100 | Hand Held Outside Neck Turner |
HOT100-011 | HOT100 – Body (gold anodized) |
| HOT100-012 | HOT100 – Carbide Cutter |
HOT100-013 | HOT100 – Micro Adjust Knob |
HOT100-014 | HOT100 – Micrometer Spindle |
SCR10-32X3/16SS | Screw 10-32 x 3/16″ Socket Set Screw |
HOT100-019 | HOT100 – Carbide Cutter Lock Screw 8-32 x 1/4″ Button Cap Screw |
HOT100-019A | HOT100 – Cutter Screw Spring Washer |
HOT100-019B | HOT100 – Cutter Screw Flat Washer |
HOT100-022 and HOT100-023 | HOT100 – 1/4″ X 3/4″ Yellow Knurled Knob and HOT100 – Case Handle Screw (aluminum) |
HOT100-024 | HOT100 – Hex Head Socket Set Screw 6-32 x 1/8″ with nylon tip |
HOT100-101 | HOT100 – Regular Case Holder with Screw |
| HOT100-102 | HOT100 – Large Case Holder with Screw (holds cases from .593″-.812″ including 50 BMG ) |
Co-Ax® Reloading Press
| Part Number (SKU) | Name |
|---|---|
| 028271 | Co-Ax Reloading Press with “S” Jaws |
| 001231 | Reloading Press – Lower Shellholder Jaws-“S” (Standard. Set of 2). |
| 001251 | Reloading Press – Lower Shellholder Jaws-“LS” (Large/Small. Set of 2) |
HEXWRENCH1/8 | Hex Wrench (1/8″) |
HEXWRENCH5/32 | Hex Wrench (5/32″) |
028271-011 | Reloading Press – Handle Grip |
028271-013 | Reloading Press – Handle Tube |
028271-014 | Reloading Press – Handle Set Screw (1/4-28) |
028271-016 | Reloading Press – Top Shellholder Jaws (Requires 3 per press) |
SCR10-24X1/2SHDCP | Reloading Press – 10-24 X 1/2 inch Socket Head Cap Screw. (3 required per press to hold top jaws) |
028271-017 | Reloading Press – Top Jaw Block |
028271-018 | Reloading Press – Locator for Case Priming |
028271-020 | Reloading Press – 10-24 X 5/8″ Button Head Screw (4 required) |
028271-023 | Reloading Press – Overhead Primer Spring (component of an assembly) |
028271-026 | Reloading Press – Pin “A” (2 required) |
028271-026A | Reloading Press – 1/8″ X 1″ Roll Pin for Pin ‘A’ |
028271-028 | Reloading Press – Lock Ring Detent Screw |
028271-029 | Reloading Press – Lock Ring Detent Spring |
028271-030 | Reloading Press – Lock Ring Detent Ball |
028271-031 | Reloading Press – Frame Casting (machined) |
028271-032 | Reloading Press – Pin B (2 required) |
028271-034 | Reloading Press – Link (2 required) |
028271-035 | Reloading Press – 1/2 inch E-Ring (4 required) |
| 028271-037 | Reloading Press – Shellholder Jaw Housing |
028271-038 | Reloading Press – 1/8″ X 5/8″ Roll Pin (2 required) |
| 028271-039 | Reloading Press – Jaw Pressure Spring (qty. 1 per order; 2 required) |
| 028271-044 | Reloading Press – Jaw Opening Screw |
028271-045 | Reloading Press – Guide Block Casting |
| 028271-046 | Reloading Press – Wear Plate |
028271-047 | Reloading Press – Pin C (2 required) |
028271-048 | Reloading Press – Guide Rod (2 required) |
| 028271-050-B3 | Reloading Press B3 – Primer Catcher Cap |
| 028271-050 | Reloading Press B4 – Primer Catcher Cap |
| 028271-051 | Reloading Press – Primer Catcher Cup |
028271-052 | Reloading Press – Drop Tube Retaining Ring |
028271-053 | B-3 Reloading Press – Primer Drop Tube with Retaining Ring 5/16″ O.D. |
028271-057 | B-4 & B-5 Reloading Press – Primer Drop Tube with Retaining Ring 3/8″ O.D. |
028271-054 | Reloading Press – 10-24 X 3/8″ Socket Set Screw (2 required per press to hold Pin C) |
028271-055 | Reloading Press – B3 Yoke Handle-Machined Casting |
028271-100 | Reloading Press – Handle and Grip Assembly |
| 028271-101 | Reloading Press – Primer Seater Assembly-Small |
| 028271-102 | Reloading Press – Primer Seater Assembly-Large |
028000 | Reloading Press – B1 TO B2 Press Conversion Kit (upgrades priming system, call for availability) |
Bullet Pullers
Parts For Standard Bullet Pullers
| Part Number (SKU) | Name |
|---|---|
| BP1010 | Standard Bullet Puller (no collet included) |
| BPXXXX | Bullet Puller Collets (each) |
BP1010-011 | Bullet Puller Body |
BP1010-012 | Bullet Puller Collet Screw |
BP1010-013 | Bullet Puller Handle |
BP1010-014 | Bullet Puller Locknut |
Parts For Universal Bullet Pullers
| Part Number (SKU) | Name |
|---|---|
| UP1010 | Universal Bullet Puller (no collet included) |
UP1010-012 | Universal Bullet Puller Collet Screw |
UP1010-014 | Universal Bullet Puller Cross Bolt Lock Ring Screw |
Co-Ax Primer Seater
| Part Number (SKU) | Name |
|---|---|
| 011521 | Co-Ax Primer Seater with E-Z Just Shellholder Jaws |
| 011521-011LG | Primer Seater – Primer Feed Tube Large |
| 011521-011SM | Primer Seater – Primer Feed Tube Small |
011521-012 | Primer Seater – Base Casting (machined) |
011521-013LG | Primer Seater – Housing Large (component of an assembly) |
011521-013SM | Primer Seater – Housing Small (component of an assembly) |
011521-014 | Primer Seater – Handle Rivet |
011521-015 | Primer Seater – Handle Casting |
011521-016 | Primer Seater – Spring (component of an assembly) |
011521-017 | Primer Seater – Handle Pin |
011521-018 | Primer Seater – Roll Pin 1/16″ x 3/16″ (component of an assembly) |
011521-019LG | Primer Seater – Post Large (component of an assembly) |
011521-019SM | Primer Seater – Post Small (component of an assembly) |
011521-020 | Primer Seater – Slotted Headless Screw 1/4-20 X 1/4″ |
028271-016 | Reloading Press / Primer Seater – Shellholder Jaws (3 required per Reloading Press or Primer Seater) |
011521-100 | Primer Seater – Small Primer Seater Assembly |
011521-101 | Primer Seater – Large Primer Seater Assembly |
SCR10-24X1/2SHDCP | 10-24 X 1/2 inch Socket Head Cap Screw (3 required per Reloading Press or Primer Seater to hold jaws) |
Bench Rest Powder Measure
| Part Number (SKU) | Name |
|---|---|
010631 | Bench Rest Powder Measure (BRPM) |
010631-011 | BRPM – Body Casting (machined) |
010631-012 | BRPM – C-Clamp with Screw Washer & Swivel |
010631-013 | BRPM – Slotted Headless Set Screw (10-24 x 1/4″) with cup point (2 per tool). Secures drop tube & funnel to body. |
010631-014 | BRPM – Handle Stop Expansion Pin (3/16″ x 1/2″) |
010631-015 | BRPM – Arm Casting (machined) |
010631-016 | BRPM – Steel Roll Expansion Pin (1/8″ x 1/4″) for Arm. |
010631-017 | BRPM – Vernier Sticker for Arm |
010631-018 | BRPM – Slide Rule |
010631-020 | BRPM – Washer (9/32″ x 5/8″) |
010631-021 | BRPM – Locknut (1/4-20 Cadmium Plated) |
010631-022 | BRPM – Aluminum Knob for Slide Rule |
010631-023 | BRPM – Shaft for Slide Rule (screw), 10-32 x 5/8″ Socket Head Cap Screws, assembles with the aluminum knob |
010631-024 | BRPM – Charge Bar |
| 010631-025 | BRPM – Hopper |
| 010631-025-LID | BRPM – Hopper Lid Only |
010631-026 | BRPM – Crossbolt |
010631-027SM | BRPM – Drop Tube – Small (.234″ maximum capacity) |
010631-027LG | BRPM – Drop Tube – Large (.580″ maximum capacity) |
011051 | BRPM – Long Drop Tube (optional) |
Co-Ax Case & Cartridge Inspector
| Part Number (SKU) | Name |
|---|---|
| 010482 | Co-Ax Case and Cartridge Inspector, dial indicator included |
010482-011 | Inspector – Base Casting (machined) |
010482-012 | Inspector – Bracket (to hold dial) |
010482-013 | Inspector – Main Lock Nut |
DIENUTK30-1/4-28 | Inspector – Knurled Lock Nut |
010482-015 | Inspector – Stop Bar |
010482-016 | Inspector – V Bracket |
010482-017 | Inspector – R.H.* Stop Pin * (right hand) |
010482-018 | Inspector – Spring |
010482-020 | Inspector – Truss Head Screws 6-32 x 3/16″ (2 required – fastens V to stop bar) |
010482-021 | Inspector – Large Wing Nut (1/4-20 x 1/2″) |
010482-022 | Inspector – Small Wing Nut (10-32 x 1/2″) |
010482-0181 | Inspector – Clip for RH (right hand) Stop Pin |
| 010482-100 | Inspector – Stop Bar Assembly (P/Ns -15, -16, & -20) |
010482-028921 | Inspector – Dial Indicator with .001″ Graduation (1½” face with rear mounting lug) |
Case Sizing Lubricants: Case Neck Graphiter
| Part Number (SKU) | Name |
|---|---|
| 011341 | Case Neck Graphiter |
011341-011 | Case Graphiter Base and Top |
| 011341-012 | Motor Mica |
| 011341-013 | 22 Caliber Brush |
| 011341-014 | 270 Caliber Brush |
| 011341-015 | 35 Caliber Brush |
Sizing Dies
Parts For Bushing Bump Neck Sizing Dies
(see also Bushing Bump Neck Sizing Dies Caliber Sizing & Replacement Part Compatibility )
| Part Number (SKU) | Name |
|---|---|
DIENUTA10-10-32 | Die Locknut |
DIESZRD10-XX | Sizer Die Spindle (Specify Caliber) |
DIE-I-XX | Long or Short Standard Decapping Pin for Sizing Die |
DIE-I-XX-SPCL | Long or Short Special (Narrow) Decapping Pin for Sizing Die |
| DIE-G-10 | Cross Bolt Die Lock Ring |
DIESZR-W-10 | Sizer Die Spindle Washer |
DIENUTX10-9/16-18 | Large Lock Nut |
Y-10-1.350 | Spindle Bushing 1.350 |
Y-10-1.500 | Spindle Bushing 1.500 |
Y-10-1.625 | Spindle Bushing 1.625 |
Full Length (see also FLS Caliber Sizing & Replacement Part Compatibility) )
(see also NS Caliber Sizing & Replacement Part Compatibility )
| Part Number (SKU) | Name |
|---|---|
DIENUTA10-10-32 | Die Locknut |
DIESZR-B-10 | Sizer Die Spindle Bushing |
DIESZRC10-0XXXXX | Sizer Die Body (Specify Caliber) |
DIESZRD10-XX | Sizer Die Spindle (Specify Caliber) |
| DIESZR-E-10-XXX | Sizer Die Expander Ball (Specify Caliber) |
| DIE-G-10 | Cross Bolt Die Lock Ring |
| DIESZR-H-10 | Sizer Die Lock Nut (Decapping Pin) |
DIE-I-XX | Long or Short Standard Decapping Pin for Sizing Die |
DIE-I-XX-SPCL | Long or Short Standard Decapping Pin for Sizing Die |
DIESZRDCUNXXXX | Decapping Unit (Specify Caliber) |
DIESZR-W-10 | Sizer Die Spindle Washer |
Seater Dies
Parts For Seater Dies
(see also Caliber Sizing & Replacement Part Compatibility )
| Part Number (SKU) | Name |
|---|---|
| DIESTRJ30 | Seater Die Bullet Seating Stem (Specify Caliber) |
DIESTR-L-30 | Seater Die Body (Specify Caliber) |
DIESTR-M-30 | Seater Die Return Spring |
DIESTR-N-30 | Seater Die Retaining Ring |
DIESTR-O-30 | Seater Die Threaded Sleeve (Specify Caliber) |
DIESTRP30 | Seater Die Chamber (Specify Caliber) |
DIENUTX10-9/16-18 | Large Lock Nut |
| DIE-G-10 | Cross Bolt Die Lock Ring |
| DIE0002 | Deluxe Die Box. Holds up to 3 dies. |
Parts For Ultra Micrometer Seater Dies
(see also Caliber Sizing & Replacement Part Compatibility )
| Part Number (SKU) | Name |
|---|---|
| DIESTRJ30-U | Seater Die Bullet Seating Stem (Specify Caliber) |
DIENUTA10M OR K30M | Die Lock Nut (Specify Caliber) |
DIESTR-Q-30 | Ultra Micrometer Seater Die Head (Specify Caliber) |
DIESTR-L-30-ORING | Ultra Micrometer Seater Die O-Ring |
DIESTR-M-30 | Seater Die Return Spring |
DIESTR-MODL-30 | Ultra Micrometer Seater Die Body (1/4-40 OR 10-40) |
DIESTR-N-30 | Seater Die Retaining Ring |
DIESTR-O-30 | Seater Die Threaded Sleeve (Specify Caliber) |
| DIE-G-10 | Cross Bolt Die Lock Ring |
DIESTRP30 | Seater Die Chamber (Specify Caliber) |
Stuck Case Remover
Parts For Stuck Case Remover
| Part Number (SKU) | Name |
|---|---|
| SC1000 | Stuck Case Remover |
SC1000-011SM | Stuck Case Remover Hex Nut (small) |
SC1000-011LG | Stuck Case Remover Hex Nut (large) |
SC1000-012SM | Stuck Case Remover Rod (small) |
SC1000-012LG | Stuck Case Remover Rod (large) |
SC1000-013 | Stuck Case Remover Washer |
Gunsmithing Tools
Parts For Universal Sight Mounting Fixture (USMF)
| Part Number (SKU) | Name |
|---|---|
| UF1000 | Universal Sight Mounting Fixture with three 6-48 Drill Jig Bushings |
UF1000-011 | USMF – Base Casting (machined to matched Overarm) |
UF1000-012 | USMF – Overarm Casting std. spacing (machined to matched Base Casting). Must send in your fixture’s base. |
UF1000-013 | USMF – Stop Block |
UF1000-014 | USMF – C-Clamp Casting (Machined) with Screw |
UF1000-015 | USMF – Locating Pin (center) |
UF1000-017 | USMF – Aluminum Pad (2 required per USMF) |
UF1000-019 | USMF – Stop Screw for Overarm and Stop Block (2 required per USMF) |
UF1000-020 | USMF – T-Slot Nut for Overarm and Stop Block (2 required per USMF) |
UF1000-021 | USMF – Support Pad Clamp |
UF1000-034 | USMF – T-Slot Screw for Over Arm and Stop Block |
UF1000-035 | USMF – Screw for Support Pad Shaft/Clamp Assembly |
UF1000-036 | USMF – 3/8″-16 Screw for 2 “V” Blocks & Support Pad |
UF1000-037 | USMF – Screw for Barrel “C” Clamps |
UF1000-100 | USMF – Stop Block Assembly (P/Ns -13, -20, -22, -34) |
UF1000-102 | USMF – “V” Block Assembly (2 required per USMF) |
UF1000-103 | USMF – Support Pad Assembly |
HEXWRENCH3/16 | 3/16″ Hex Key Wrench |
Parts For Swiv-O-Ling Vise
| Part Number (SKU) | Name |
|---|---|
| SV1000 | Swiv-O-Ling Vise |
PT1010-011 | Power Case Trimmer & Swiv-O-Ling Vise – Base |
SV1000-012 | Swiv-O-Ling Vise – Knurled Guide Screw |
SV1000-013 | Swiv-O-Ling Vise – Drilled, Locking Screw |
SV1000-014 | Swiv-O-Ling Vise – Rectangular Jaw (movable) |
SV1000-015 | Swiv-O-Ling Vise – Square Jaw with Ball |
SV1000-016 and SV1000-017 | Swiv-O-Ling Vise – Collet Housing and Swiv-O-Ling Vise – Collet (sold together) |
PT1010-015 | Power Case Trimmer & Swiv-O-Ling Vise – Collet Screw |
PT1010-012 | Power Case Trimmer & Swiv-O-Ling Vise – Collet Locking Handle |
Parts For Gold Inlay
| Part Number (SKU) | Name |
|---|---|
| 001001 | Gold Inlay (Engraving) Filling Kit |
| 001001-101 | Gold Cleaner, 1/2 oz. (refill) |
| 001001-103 | Gold Liquid Base, 1/2 oz. (refill) |
| 001001-102 | Gold (bronze) Powder .048 oz. (refill) |
| 001041-021 | Silver (aluminum) Powder .048 oz. |