« Return to Previous Page

3-in-1 Case Mouth Cutters

3-in-1 Case Mouth Cutters

$92.00


Select a product according to caliber.


Clear
Category:
  • Description

    Product Description

    The innovative 3-in-1 Case Mouth Cutter combines case trimming, inside deburring and outside deburring into one easy step. Long-lasting carbide blades simultaneously perform three functions to save time and improve consistency:

    • Trims the case to length.
    • Chamfers the inside case mouth to an angle of 14°.
    • Chamfers the outside case mouth to an angle of 30°.

    The Cutter mounts on an Original or Power Case Trimmer. You can trim from 250 to 400 cases per hour.

    • First – and only – three-in-one cutter on the market to use high-quality blades made from US-manufactured carbide steel. If used exclusively on brass cases, these blades should never need sharpening.
    • Carbide cutter blades are factory adjusted on the blade holder, ensuring precise cutting.
    • Installs by sliding over the Case Trimmer Cutter Shaft and secures with one set screw.
    • Caliber-specific Pilots included with 3-in-1 Case Mouth Cutters designed for popular cartridges.

    Tip - For cases up to 2.20″ long, use the Base that comes with the Original Case Trimmer. For cases longer than 2.20″, use a Long Base, which can handle cases from 1.0″ to 3.30” when used with the 3-in-1 Case Mouth Cutter.

  • Additional information

    Additional information

    Weight 0.12500 lbs
    Caliber

    224, 243 (6mm), 264 (6.5mm), 277, 284 (7mm), 308

  • Resources

    Resources

    Documentation
    Sales Sheet